Here are some panel cutouts for a variety of standard size instruments.
For an extensive list of instrument mounting clamp and case information, check out the MSP Aviation site
Dimensions
Instrument Cutouts
It's possible that I'm not as smart as I think I am. (Occasionally, I
have moments when I know this to be true. Fortunately the feeling passes
quickly.) Although I have tried to make this information as accurate as
I can, it is not only possible, but also quite likely, that errors lurk
within. I cannot and do not warrant these pages to be error free and
correct. Further I accept no liability for the use of this information
(or misinformation). If, after reading this, you are still interested,
please be aware that the contents of this site are protected by
copyright (copyright © 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
2010, 2011, 2012, 2013 by John M. Powell). Nonetheless, you may copy this material
subject to these three conditions: (1) the copyright notice is copied
and presented along with the material, (2) the copy is used for
non-commercial purposes, and (3) the source of the material is properly
credited. And of course, you may link to this page.